ki2 help again

pinkfloyd

Member
Joined
Dec 29, 2009
Messages
85
Reaction score
0
Location
lowell, Massachusetts
hey guys installed a new module for some reason taking it out and restalling it the fourth time the game worked,so i played couple of games shut it off for the night next day put the game on ,getting a black screen then blue,then it goes too a nintendo distored screen and keeps doing the same thing,anybody know why this is doing this,thanks
 
where did you get your CF kit from? if it wasn't a RevisionX or ToplessZ one it's probably made from cheap components. I wanna say Broodwich responded to your other thread saying sometimes with the cheap kits you can't install them completely flush.

next step would probably be to check your voltage. I periodically get the reset issue with my KI1 and that's with a RevisionX kit, I went and reseated every chip and cleaned my JAMMA edge and adjusted the power supply to feed 5.10V to the roms.
 
what the heck is going on?.
have you isolated this to the module by trying your hard drive instead?
that is if you have a good hard drive.

otherwise intermittent results may be a bad power supply or game board.

another thought is the header pins on the KI board may need to be changed..
i have new headers too that i could fin in :)

another point make sure the switch on the moduel is set to M and not S. you can find it on the top.

those modules fit perfectly you really cannot screw them up.

want me to just send you another one?
if it fixes your problem just toss the one you have now.
thanks!
Chad.

hey guys installed a new module for some reason taking it out and restalling it the fourth time the game worked,so i played couple of games shut it off for the night next day put the game on ,getting a black screen then blue,then it goes too a nintendo distored screen and keeps doing the same thing,anybody know why this is doing this,thanks
 
Last edited by a moderator:
Back
Top Bottom