K7500 Pincushioning Issue

king2317

New member
Joined
Feb 11, 2017
Messages
6
Reaction score
0
Location
Texas
Hi all.

I recently had a chassis for my K7500 recapped. After re-installing I now have a wonderful pincushioning issues ) ( . Before it was not present. Adjusting the pincushion board doesn't do anything on screen-I've also tried another pincushion board with the same results.

Here are a few pics to show the problem. Along with one phantom connection I can't for the life of me find where it goes (may be the problem?) .

Any help would be awesome!
 

Attachments

  • IMG_5871.jpg
    IMG_5871.jpg
    299 KB · Views: 20
  • IMG_5874 (1).jpg
    IMG_5874 (1).jpg
    395.6 KB · Views: 25
that "phantom connection" goes to the transistor on the rear right corner. its on the metal plate sticking up. it's for the horizontal width but might fix your issue? plug it in and let us know.
 
The connector can go on two different ways. Obviously one way will have no effect. The other should take care of the problem as mentioned.

Good thing is if installed wrong on the first try it won't damage the transistor.

Ed
 
Awesome! I appreciate the guidance. I will try it tonight and let you all know. Thanks again.
 
That was it! fixed the pincushion problem completely. Looking back at the pic I feel like a goof. Thank you guys for the help!
 
Back
Top Bottom