K7500 - p903 - vr900

Kopey

Member

Donor 2017
Joined
Nov 5, 2016
Messages
210
Reaction score
4
Location
Sault Ste. Marie, Ontario
Hi. I almost have my K7500 fully working;however, the VR900 (H Width) barely works and when I do try to adjust it, it actually slightly skews the image and nothing more. I tried the P903 remote board with my other K7500 and it adjusts the picture width no problem so I know the remote board works. So is there a certain spot on the chassis that would be the cause of this that I can focus on? Any components that I should be testing that could be the cause? If the picture was only off a tiny bit I could live with it but it has to be off by about 2 inches per side. Here's a couple of pics that I took from the video adjustment menu in my Silver Strike Bowling game just so you can see what I am talking about. Any help would be much appreciated. Thanks.

Robert

Pic #1 - I aligned the image to the right side so you can see how much it's off on the left.
http://digitalorange.ca/arcade/SSB/IMG_7832.JPG

Pic #2 - This is what it looks like when I centred the image.
http://digitalorange.ca/arcade/SSB/IMG_7833.JPG
 
Hmmm, maybe I should have put "Naked girl pics" in my post's subject line to draw more attention. Lol. Anyone out there have any advice or tips on how to fix my issue? Thanks.

Robert
 
Width

I got the same problem just now on my Daytona USA
Any one know the fix?
 

Attachments

  • Daytona USA.jpg
    Daytona USA.jpg
    891.9 KB · Views: 7
Last edited:
Back
Top Bottom