K7400 Linearity Coil

SteelRush

Member

Donor 2017
Joined
Mar 2, 2017
Messages
157
Reaction score
5
Location
Florida
I have a K7400 I grabbed non working that has a linearity coil that is broken in half. Can replacements still be found?
 
if you can still glue it back together then i would do that.

if it is completely broken you will need a replacement.

if you need it fixed, your welcome to send it in.

Peace
Buffett
 
I noticed I have a broken one too. :(

What kind of glue should I use to fix it? Does it matter? Super Glue?
 
cool cool.

make sure you align it up the same or you will have a odd linearity you will not be able to adjust out.

Peace
Buffett
 
If I have a U2000/U5000/K7500 parts board, are the Linearity Coils the same? Could I steal one of those?
 
If I have a U2000/U5000/K7500 parts board, are the Linearity Coils the same? Could I steal one of those?

they can be different, i would not advise mixing and matching unless you try it and are happy with the results.

the 25" and 27" versions had different coils to compensate for the size and curve of the tubes.

Peace
Buffett
 
email or call chad he is very helpful and he will let you know which one works if he has the correct one.

I sent him an email last week and no response yet.

He must be a busy guy at the moment.

I'm not in a hurry, so I'll sit tight.

Thanks again.
 
Back
Top Bottom