K7302 C339 value?

gottifour

Active member
Joined
Jan 16, 2010
Messages
1,313
Reaction score
6
Location
Munster, Indiana
I have a 13K7302 I am capping with a twisted quarter kit. C339 currently is 470uf 35v but the kit recommends, and supplies a 100uf 16v.

I know some of the kits change some of the stock values to what they really should be, but this seems way different.

Any ideas?

Thanks. Dustin
 
Thanks for the response Kevin!

I wonder if I have the wrong cap kit? I've done about 10 and they matched with no problem. Do you know if the 13" and the 19" are different?

Dustin
 
The schematic is for both and I didn't see anything in the notes about that particular cap.

Does that one appear to have been changed before ?

If I'm ever in total doubt, I go with the schematic and then go from there.
 
The schematic is for both and I didn't see anything in the notes about that particular cap.

Does that one appear to have been changed before ?

If I'm ever in total doubt, I go with the schematic and then go from there.

It looks stock to me. I don't think it has been changed.

My notes show C339 at 470µf35V.....this was a 19".

Edward

I wonder why the suggest this one instead of what is there.

Oh and this is a 19" too, I don't know why I said 13".

Thanks for checking your notes.
 
It looks stock to me. I don't think it has been changed.



I wonder why the suggest this one instead of what is there.

Oh and this is a 19" too, I don't know why I said 13".

Thanks for checking your notes.

I'm just assuming here.....the schematics are wrong....possibly a typo or a last minute design change. Most people who put together cap kits use the schematics as a guide....so, if something is wrong on the schematics...it makes it's way into the kits. My notes were from an untouched monitor.

Edward
 
I see. Thank you, I will replace it with the same value.


Dustin
I'm just assuming here.....the schematics are wrong....possibly a typo or a last minute design change. Most people who put together cap kits use the schematics as a guide....so, if something is wrong on the schematics...it makes it's way into the kits. My notes were from an untouched monitor.

Edward
 
Back
Top Bottom