K7203 Neck Boards

slowdive

New member
Joined
Jun 7, 2016
Messages
7
Reaction score
0
Location
Michigan
Would anyone happen to know if a P760 neck board will work on a 7203 chassis? I'm trying to find a way to use a CR-23 tube on the 7203. The P826 seems to be the default for the 7203 and its a CR-31.

The specs for the P760 indicate that its compatible with the 7201 series but I thought it may also work on the 7203. The 760 and 826 do look very similar and seem to use the same ribbon connector.

Appreciate any thoughts on this. I'd hate to try it only to find out it doesnt work. Or worse yet, damage a good tube and chassis.
 
I had a k7302 with the wrong socket,and was able to replace it with the right one. On the neck board I could see the outline for the socket. It was facing 180 degrees from where the original socket was. I believe it was labeled for 13 inch screen(on the neck board)but it worked fine with the 19th tube
 
I had a k7302 with the wrong socket,and was able to replace it with the right one. On the neck board I could see the outline for the socket. It was facing 180 degrees from where the original socket was. I believe it was labeled for 13 inch screen(on the neck board)but it worked fine with the 19th tube

You might want to post this question over in the monitor forums. You will likely get more help over there.
 
Back
Top Bottom