K7203 Neck Boards 8 pin and 10 pin tubes

butthead

New member
Joined
Nov 30, 2008
Messages
498
Reaction score
4
Location
bath, Pennsylvania
I was one of those suckers that got 2 of those screen burned monitors.
Well he sent me 2 replacement tubes which have 10 pins not 8 like the ones that I bought. Which I did agree to, I can use the tubes in other games if I have to.
But was wondering if there is another neck board I could swap out that has 10 pins to save me the hassle of changing the yokes. The 8 pin board is a 802.
Yes all 3 frames have 7203 on them. Still waiting for one more tube.
Thanks for any input.
Tom
 
Sorry, Yes it is P826
Called W/G they had a little trouble figuring it out also. But they are out there. 10 pin neckboards. Anybody have one?
PN197200
Neck Board for Model K7203


Enlarge Image Call 1 (800) 336-6630 for pricing Note: Between March 2001 and October 2002, this model used Orion CRT Pt. # 088X0413-506 with chassis board pt. # 054A7203-017 (19 inch Model K7203 chassis board with frequency switch
Used on: 35L, 49A, 37L, 73L, 53A, 66F, 66H, 66K, 41L, 25L
Size : 29mm


Used with:
Chungwa CRT pt. # 088X0439-001
 
Last edited:
Sorry, Yes it is P826
Called W/G they had a little trouble figuring it out also. But they are out there. 10 pin neckboards. Anybody have one?
PN197200
Neck Board for Model K7203


Enlarge Image Call 1 (800) 336-6630 for pricing Note: Between March 2001 and October 2002, this model used Orion CRT Pt. # 088X0413-506 with chassis board pt. # 054A7203-017 (19 inch Model K7203 chassis board with frequency switch
Used on: 35L, 49A, 37L, 73L, 53A, 66F, 66H, 66K, 41L, 25L
Size : 29mm


Used with:
Chungwa CRT pt. # 088X0439-001


I've had both come through the shop. I had a stack of five WG19K7203's I'd just fixed. All needed to be rejuvenated. As my buddy Steve was zapping them...he didn't have a socket to fit one of the tubes. We both thought it was strange....If I recall, the yoke was different too. I know it had a different part number.

Edward
 
I've had both come through the shop. I had a stack of five WG19K7203's I'd just fixed. All needed to be rejuvenated. As my buddy Steve was zapping them...he didn't have a socket to fit one of the tubes. We both thought it was strange....If I recall, the yoke was different too. I know it had a different part number.

Edward

Chit W/G wanted 47.00 for the neckboard and 116.00 for the whole deal Chassis and neckboard. I got two chassis at that price . I will put the eight pin chassies in other tubes If can find them.The Chassie is the same but the neckboard is different.
Thanks Ken for waking me up . Now store it in that memory of yours, Which We All Appricate.
Thanks, Tom
 
Back
Top Bottom