K7000A 19" Left Side Vertical Lines Issue

Thanks a lot for labeling the problem points!

I gave it a once over visually and I didn't see any cracked/cold joints or halo-ing on the yoke pins. It probably won't hurt to reflow them anyways though.
yeah Zenith used those rivet things, the K7000A is more robust than the Wells-Gardner K7000, but you can see what happens if you leave the diodes untouched lol and also the yoke (important) and degauss (not as important) pins can form halos. losing the red wire pin to the yoke would be kind of particularly detrimental. I also forgot to mark the width coil, oops. those can get hot enough the traces break off, then you'll have horizontal collapse.
 
Back
Top Bottom