k7000 yoke readings?

paul400

Well-known member
Joined
Nov 8, 2010
Messages
2,416
Reaction score
219
Location
Hixson, Tennessee
can someone tell me the correct yoke readins for the p447 and p538 yokes. currently picked up a 25inch tv and want to know if my reading are good. how close can they be to work?
 
can someone tell me the correct yoke readins for the p447 and p538 yokes. currently picked up a 25inch tv and want to know if my reading are good. how close can they be to work?

Not sure about a 25" yoke but the 19" is vert 13ohms and horz is 4ohms I think.
 
Last edited:
can someone tell me the correct yoke readins for the p447 and p538 yokes. currently picked up a 25inch tv and want to know if my reading are good. how close can they be to work?



a P447 is a 19"


P538 is a 25"


they are about the same.

1.0-3.8 V and 8.0-14.5 H

somewhere in that range for both chassis types.

Peace
Buffett
 
a P447 is a 19"


P538 is a 25"


they are about the same.

1.0-3.8 V and 8.0-14.5 H

somewhere in that range for both chassis types.

Peace
Buffett

thats a pretty big range, i thought they had to be within 1 or two omhs to drop right in.the 25 in tv i got is 1v and 8.5h direct drop in then, thanks.
 
believe it or not i have several factory wells 25" K7000 yoks that measure.

.5 V and 5.1 H

and i use them as test tubes for chassis i repair.

then i have some 25" yokes that measure 2.5 V and 12.1 H
that i use for testing or have in games.

so a K7000 is a very easy chassis to mate to a yoke.

so i would try it and see what the pic looks like.

Peace
Buffett
 
Listen to buffett.. I'm just a novice in the monitor game.
Good luck!


believe it or not i have several factory wells 25" K7000 yoks that measure.

.5 V and 5.1 H

and i use them as test tubes for chassis i repair.

then i have some 25" yokes that measure 2.5 V and 12.1 H
that i use for testing or have in games.

so a K7000 is a very easy chassis to mate to a yoke.

so i would try it and see what the pic looks like.

Peace
Buffett
 
believe it or not i have several factory wells 25" K7000 yoks that measure.

.5 V and 5.1 H

and i use them as test tubes for chassis i repair.

then i have some 25" yokes that measure 2.5 V and 12.1 H
that i use for testing or have in games.

so a K7000 is a very easy chassis to mate to a yoke.

so i would try it and see what the pic looks like.

Peace
Buffett

Yep, I've also noticed a somewhat broad range in the yoke readings of the 7000 series.

Edward
 
Back
Top Bottom