K7000 Vertical Issue

MarkKnust

New member
Joined
Mar 23, 2010
Messages
31
Reaction score
0
Location
Blue Springs, Missouri
I have a K7000 that has a vertical issue. Some of the wires were torn off on the back and I honestly didn't know where they went so I reconnected as best as I could guess.

First Picture is the screen
and the next two are pictures of the wires that were torn and where i reconnected them too. Let me know if you think they should go in different spots.

sorry about the quality of the last two pictures, but i think they can still be mad out. I appreciate any help.
 

Attachments

  • 257.jpg
    257.jpg
    91 KB · Views: 76
  • 261.jpg
    261.jpg
    95.5 KB · Views: 58
  • 264.jpg
    264.jpg
    96.3 KB · Views: 69
looks like you have a stadard "pots onboard" k7000 chassis there that had a remote board ADDED ON later on.

I have pics somewhere of a couple different wiring jobs on these, but im not exactly sure where heh.

You might have to end up taking that krap off, and putting a new set of pots back on the chassis like it came from the factory.

thats little of an odd issue there. How do the caps look? if old, id reccomend caps anyways. what does the b+ measure at?
 
I got it fixed by reattaching all the wires in the back to the correct spots.

By fixed I mean it's playable and clear. I still am missing about two inches on the bottom where the screen doesn't stretch all the way. I'm going recap the board since I haven't done that yet, but i expect that to fix the issue at the bottom. While i had the board out to fix the wires i fixed Cap C57 (seems to be a very important one) and that cleared my picture up immensly.

I'll keep you updated on the rest result.
 
Back
Top Bottom