You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
I have to cobble together a 19" K7000 with a likely compatible tube (based on the yoke Ohm readings, at least). The pin headers on the donor TV chassis are different than what's on the k7000 chassis, so I ordered the appropriate connectors and pins to swap the connectors out on the yoke wires.
The color scheme of the yoke wires is different as well, so I checked the Ohms on the yoke and determined which was the horizontal and which was the vertical. What I am unsure of is the pinout for the yoke connection on the K7000, meaning I don't know which pins are for vertical and which are for horizontal.
Looking at the schematic, I am ASSUMING that the pins marked "yellow" and "green" are where the vertical wires connect, and the "red" and "blue" spots on the header are where the horizontal connect. Are my assumptions correct?