K7000 med res

mike11

Active member
Joined
Mar 7, 2012
Messages
1,617
Reaction score
9
Location
Pennsylvania
I picked up a calif speed ...... ps caps were bad and hissing ...... recapped the whole chassis and I have a mirror image that is also reversed as well as v hold seems not to lock on ...... check the pic
Any input appreciated
Thanks

Sorry I can't rotate the pics when loaded from my phone
 

Attachments

  • IMG_0162.jpg
    IMG_0162.jpg
    522.5 KB · Views: 33
have you checked the yoke connector that it's on correctly because it will give you the mirror/reversed image. the vertical and horizontal must not be switched with each other but they each may need to be installed on the same pcb pins but turned 180 degrees and reinstalled.
 
It's actually a mirror image on the same image ... take a peek at the pic...... it displays correctly but 2x as well as another time faintly as a reverse of the original within that image all on the screen ....... hard to explain
 
Are you sure that the monitor is a K7000 and not a U5000. I have a California Speed and mine has a U5000. If it does, maybe the cap kit is wrong? Was it working normally before the capkit?

Sure does look like you have the yoke wires switched around tho.
 
It wasn't ..... caps were bad ....I fixed it ... I had too many remote boards laying here n grabbed the wrong one with the correct remote it works fine now
 
Back
Top Bottom