K7000 interchangeable?

bradp56

New member
Joined
Jan 25, 2010
Messages
523
Reaction score
0
Location
Baldwin, Maryland
I have 4 Monitors with K7000 Chassis.

2 are 25" monitors

2 are 19" monitors - 1 of these is the K7000a chassis

My question is will all these chassis work if I moved them around so I can check the tubes and all?
 
Provided the neck sockets fit, yes, you can move the chassis around. But the images won't fit if you move a 19" chassis to a 25" tube etc
 
Thats fine I just want to verify a tube issue. I have a tube where the colors are all blue. I can only get red when I hit the back of the neck board PCB but these are the only colors it looks like a bad tube.
 
It depends on the individual chassis. The K7000 came in standard resolution and medium resolution. If you have a 19" chassis with the larger neck, allowing it to fit on a 25" tube, it is most likely medium resolution. Another variation of K7000 includes inverted colors.

Swapping chassis like you intend to do can isolate the fault to the tube but most tubes are repairable with a rejuvenator.
 
I swapped the 2 19" and its definately a tube issue. The k7000a works fine and the k7000 needs a cap kit and and flyback. Thank you all for your help I just need the tube rejuvenated.
 
Back
Top Bottom