K7000 Faint vertical line

bradp56

New member
Joined
Jan 25, 2010
Messages
523
Reaction score
0
Location
Baldwin, Maryland
Ok I replaced the flyback on my WG 25" K7000. The picture looks better but still dimmer than I would like it to be. Also I notice that I have a faint Vertical line going down the left side of the monitor. The line is so faint that if I took a pic you really couldnt see it. Its not black its the same color of the game. It sounds confusing but hard to explain. Any input would be great.
 
have you capped it yet??
lines are usually from failing caps.

is your frame grounded. if it is try removing the ground.
if not try adding one.

get your tube checked it may need a rejuve to bring it back to life.

Peace
Buffett
 
I will be calling you soon to come over there to do a rejuv. But in the mean time I was so happy that I got the flyback to work I said screw it and didnt do the cap kit. I have the caps so I will do that soon.
 
I've seen some pcbs cause a line like you describe. Usually you can adjust it off the screen.

Do you have another board you can try with it?
 
Back
Top Bottom