K7000 chassis 25" and 19" for sale or repair

Buffett

Well-known member

Donor 2012-2013
Joined
Mar 12, 2010
Messages
10,991
Reaction score
263
Location
Manassas va, Virginia
Rating - 100%
173   0   0
K7000 chassis 25" and 19" for sale or repair

taking in repair on k7000 chassis's 25", 19" med and standerd welcome

K7000 chassis's 25" and 19" ready now for sale

3 25" full cap kit including the filter cap and the 3 bipolar caps + new flybac.

3 19" standerd res full cap kit including the filter cap and the 3 bipolar caps + new flybac.

all caps are 105deg except the 3 bipolar are 85deg.

also i have reflowed all the major solder joints that are a regular failure point
on theses chassis and rpaired/reinforced all traces that have weak poins due to heat.

the 19"s are all 8 pin thin neck boards if yours are the fat neck tube you wil
have to swap the neck board.

all have ben burn tested for several hours but will be burn tested again for another
24 hours once sold.

i ony have one 19" and 25" tube and test rig so if they all
sell it will be a week or two befor i send them out due to burn testing one at a time
so please be pacient.

if you have a/multible k7000 chassis's for trade in. send it/them and
i will give up to 20$ per chassis in credit then i will send your chassis to you.


i spend alot of time on them going over them. and puting better parts in
so that they will last longer for years to come.

$150 per chassis shipped firm. usa and canada only

thanks

Peace
Buffett
 
Last edited:
k7000 25" and 19" chassis fully rebuilt tend to sell for $80 + shipping here on the forums :D
 
Last edited:
shure i can recap and do the trace and solder repair for around 90$- $100 + other parts and return shipping. on working chassis.

but that would not get you a new fly.

but the ones i have for sale i had to buy the chassis then put all the new stuff in or replace what was missing. thats why they are $150 shipped.

shure capping and other need parts will be cheaper yes.

i am willing to work with any body just shoot me a pm with what you want done.

i buy all quality parts and they cost more + flybacks are not cheap either.

Peace
Buffett
 
shure i can recap and do the trace and solder repair for around 90$- $100 + other parts and return shipping. on working chassis.

but that would not get you a new fly.

but the ones i have for sale i had to buy the chassis then put all the new stuff in or replace what was missing. thats why they are $150 shipped.

shure capping and other need parts will be cheaper yes.

i am willing to work with any body just shoot me a pm with what you want done.

i buy all quality parts and they cost more + flybacks are not cheap either.

Peace
Buffett


I'm pretty sure flybacks are like 25 bucks.

I'm giong to stick with mosseffit, he charges me 75.00 for complete cap kit flyback, and anything else that my stupid monitor chassis' need.
 
Back
Top Bottom