MarkMan
Member
Hey dudes,
Was in a hurry on a cap job and put c40 in backwards on a k7000.
Check r91, d13 and r101.
Mine were toasted, r101 was within spec but the pad on the PCB was smoked.
Just passing on the info in case anyone else makes the same mistake.
Was in a hurry on a cap job and put c40 in backwards on a k7000.
Check r91, d13 and r101.
Mine were toasted, r101 was within spec but the pad on the PCB was smoked.
Just passing on the info in case anyone else makes the same mistake.
Last edited: