K7000 - Anyone know this hack under the width cap?

streetfighterken

Well-known member
Joined
Feb 22, 2013
Messages
1,331
Reaction score
37
Location
South Dakota
New flyback and new caps on this K7000. My work was successful but the image was ridiculously wide for the game I'm using it for. So I installed a width cap, but long story short, I was impatient dealing with the mess that was directly below the width cap (I know it looks terrible). I may have soldered it wrong as the chassis is now having issues. Note that I made sure nothing is bridged so that's not the issue, even though it may look like that in the photo. Looking for another example of this hack to confirm.

Here's Video. Watch whole thing. Looks like V-Hold or sync issue at first but it's different.
 

Attachments

  • IMG_4947.jpg
    IMG_4947.jpg
    542 KB · Views: 61
Last edited:
The diode is D18 just soldered on the bottom instead of the proper place. And the poly cap is in parallel with it so it's C69 which is needed for the 25" and that chassis is the P447 (for 19") so it could be an attempt to mod a 19" chassis to 25". Of course other changes would be needed (130V voltage regulator, etc.).
 
Back
Top Bottom