Museum of the Game® & International Arcade Museum® Forums

Hey everyone, I finally got around to adjusting the K7000 in X-men vs street fighter and The G07 in galaxian and was unable to get them dialed in

Let's start with galaxian, I checked the B+ and it was 113v, adjusted it to 120v but the right side looks like it's a bit cut off and melting a bit, I also adjusted the B+ on the G07 on dig dug and it was 128v and got it down to 120v and it looks fantastic

There is a difference between the two, the one in galaxian has the mod mentioned in the arcade parts and repair cap kit and the one in dig dug does not, so I do not know if that's the issue

For the K7000 no matter which pots I adjusted I couldn't get any of the colors or brightness to get better and eventually I lost red, I don't know what else to check on this one to fix it, also there is a lot of raster lines on the screen and I have a feeling it is connected with the other issues

Back
Top Bottom