K4915 Med Res Low B+ shrunken picture

putyoursoxon

Well-known member

Donor 2022
Joined
Aug 7, 2022
Messages
1,328
Reaction score
930
Location
Virginia
Working on a k4915 medium res. Picture is shrunken and has a wave to it. It is acting like the voltage regulator is bad. R503 is mounted on the side on this one. 98v on the fuse side, ~149v on the opposite side. Replaced the VR and same issue and voltages. Reflowed the VR connections to the board, checked the sockets for the VR and they have good continuity. Full cap replacement, C507 was replaced & filter. All ceramic resistors measure good. Any idea what I should be checking next?
IMG_20241125_100915377.jpg
IMG_20241125_101450101.jpg
 
ended up being broken trace at pin 1 on the VR, had to remove solder to see it
 
Back
Top Bottom