That80sGuy Well-known member Donor 2011 Joined Jan 11, 2009 Messages 5,354 Reaction score 147 Location Georgia Oct 1, 2012 #1 Ok.. So I re-capped the K4600 in my Gorf..and now I have no video. Nothing smoked..I have neck glow..the game plays blind. Suggestions?
Ok.. So I re-capped the K4600 in my Gorf..and now I have no video. Nothing smoked..I have neck glow..the game plays blind. Suggestions?
Slo Member Donor 2011 VAPS Joined Jul 19, 2011 Messages 495 Reaction score 5 Location Ohio Oct 1, 2012 #2 That80sGuy said: Ok.. So I re-capped the K4600 in my Gorf..and now I have no video. Nothing smoked..I have neck glow..the game plays blind. Suggestions? Click to expand... I just fixed one that had cold solder joints at the headers. reflowed and all is well now.
That80sGuy said: Ok.. So I re-capped the K4600 in my Gorf..and now I have no video. Nothing smoked..I have neck glow..the game plays blind. Suggestions? Click to expand... I just fixed one that had cold solder joints at the headers. reflowed and all is well now.
OP OP That80sGuy Well-known member Donor 2011 Joined Jan 11, 2009 Messages 5,354 Reaction score 147 Location Georgia Oct 1, 2012 #3 Gah..this thing is a PITA to get out of the cab.
Slo Member Donor 2011 VAPS Joined Jul 19, 2011 Messages 495 Reaction score 5 Location Ohio Oct 1, 2012 #4 That80sGuy said: Gah..this thing is a PITA to get out of the cab. Click to expand... check the solder joints on the plug in boards first. My trouble was at the RGB input.
That80sGuy said: Gah..this thing is a PITA to get out of the cab. Click to expand... check the solder joints on the plug in boards first. My trouble was at the RGB input.
mcandrewsoun Well-known member VAPS Joined Feb 26, 2010 Messages 1,602 Reaction score 63 Location Fincastle, Virginia Oct 1, 2012 #5 Slo said: check the solder joints on the plug in boards first. My trouble was at the RGB input. Click to expand... +1 That stupid board needs +5,+12, and I think -5.. Also check the black level pot on the interface board.
Slo said: check the solder joints on the plug in boards first. My trouble was at the RGB input. Click to expand... +1 That stupid board needs +5,+12, and I think -5.. Also check the black level pot on the interface board.
Zork2 New member Joined Sep 28, 2009 Messages 1,604 Reaction score 40 Location Medina, Ohio Oct 1, 2012 #6 mcandrewsoun said: +1 Also check the black level pot on the interface board. Click to expand... Yes this will need need adjusted after a cap kit, expecially if its a Bob kit and you put a new pot on it. Remember to put the pot on the back side of the board so it can be easily adjusted....
mcandrewsoun said: +1 Also check the black level pot on the interface board. Click to expand... Yes this will need need adjusted after a cap kit, expecially if its a Bob kit and you put a new pot on it. Remember to put the pot on the back side of the board so it can be easily adjusted....