Peale Active member VAPS Joined Sep 1, 2003 Messages 3,469 Reaction score 15 Location Brattleboro, Vermont Jul 28, 2009 #1 I've got a K4600 that's missing the connector from the neckboard to the interface card. It's been cut off. What's an acceptable substitute?
I've got a K4600 that's missing the connector from the neckboard to the interface card. It's been cut off. What's an acceptable substitute?
modessitt Volunteer: Encyclopedia Submission Moderator VAPS Joined Mar 22, 2007 Messages 33,414 Reaction score 325 Location Austin, Texas Jul 28, 2009 #2 I think a normal molex like is used for the 6-pin video input molex would work just fine, as the pins are the same size and everything. If you don't have one with the correct number of slots, you can take a bigger one and cut it down...
I think a normal molex like is used for the 6-pin video input molex would work just fine, as the pins are the same size and everything. If you don't have one with the correct number of slots, you can take a bigger one and cut it down...
OP OP Peale Active member VAPS Joined Sep 1, 2003 Messages 3,469 Reaction score 15 Location Brattleboro, Vermont Jul 29, 2009 #3 Good idea, I'll check the spacing.