K4600 issue

woodmedic

Member
Joined
Apr 8, 2015
Messages
134
Reaction score
8
Location
Texas
Just picked up a ms pacman with a k4600 in it. I am going to order a cap kit and do a reflow on it but wanted to see if any of you monitor wizards might know what is wrong with it by looking at what it is doing. I don't think it is a sync issue. Defiantly not the board because I tried a known good board and it looked exactly the same.
5e26b7eec83b713c778b7736206a1b4f.jpg
 
I tried to upload a small video but it's not working for some reason. I can get it to roll either way or up and down with the controls in the monitor. It appears to sync but the image still looks like the above picture.
 
I tried to upload a small video but it's not working for some reason. I can get it to roll either way or up and down with the controls in the monitor. It appears to sync but the image still looks like the above picture.


are you using a multicade or jamma pcb with it... if so probably have to adjust the L351

EDIT: if you need a cap kit i stock all of them.
 
It's a regular ms pacman pcb but it doesn't have the daughter card. The first maze is different and it has different sprites for the fruit. It has cokes and margaritas. Lol
 
Back
Top Bottom