Just picked up a Williams Indiana Jones pin - and it's missing all the boards!!

Bummer

That's a hell of a pinball! Bummer that the pcbs are missing!! Where did they go? Heh.. Good luck on the search, I've seen the CPU pcbs pop up here and there.. Not cheap though.. How is the condition of the pin?
 
you should probably look to buy another pin to get the boards you need. Something like popeye, judge dredd or demolition man..

Yopu will probably end up paying more to buy them piece by piece, plus you will know that the boards you bought worked..
 
check mr pinball classifieds / parts section - some of those guys have board sets and such.

If you score the game for less than 1500, paying full price for boards (even getting a new Pinled main board!) you will still be doing a ok.
 
Hi,

I got the pin for $800. It's only slightly faded which is cool!

I need all the boards - just looked at the PinLED stuff - this the preferred route?

What's the recommendation on RottenDog versus PinLED?

It's missing the playfield glass also and the translite - but i've sourced the translite for $50 already.
 
Wow. You are golden then.

Theres the flipper board / upper left (pinled sells these - check ebay - 100 or so not bad)

The main driver board (300? Pinled or rotton dog either way).

The power board (where the batteries go / lower left) maybe 150 or so?

Sound board(s) - not sure if one or two - not sure of price - they sit above the main driver board / upper right - figure 100 - 200.

Yeah, go all in for these and you will be ahead of the game. Check mr pinball for the rest of the boards.

You can get the "new" boards from Pin led / rottondog or get used ones, probably save yourself a few hundred overall. I would just go with the new stuff (price them out first), either way you have a 3k+ machine for 2k or so.
 
Post pics - lets see what else you are up against - playfield, etc.

I had one - great game. Wouldnt have it back (didnt like it that much) - but i did a full restore and it came out nice. I Think the only other issue with the machine thats common is the ball trough will need a rebuild (opto problems are typical). But other than that its a solid machine and reliable.

Lets see pics!
 
Back
Top Bottom