Jurassic Part T-Rex problem

arakisssun

Member
Joined
Mar 3, 2010
Messages
976
Reaction score
8
Location
Varna, Varna, Bulgaria
I bought this pinball yesterday and today I cleaned it very well.Now I can make the repairs.First thing that I saw was that the T-rex is not moving.I still didn't checked it's fuses.
Even when machine is turning on,dysplay shows TESTING T-REX,but nothing happens-like moving
I will check the fuses tomorrow,but if it's not fuse what can it be else.
Also I want to ask-when the machine is on or off no matter-when I try to push the head of the dino it not go down very just a little,but when I was deasselbled all plastics the head goes much down from now.What is the normal situatio when you push the head?May be when I place all tha plastics something is blok the moving of the head
 
don't force it! the micro switches control power for movement....check power first then the switches, you can finger them to make him move.....
 
I think I found part of the problem.Looks like some part(s) is missing.As you can see I thnik there must have something that hold it.Can someone tell me how must be the original assemble and if it have number of the part or picutres.

Picture007-13.jpg


Picture005-7.jpg


Picture003-1.jpg


Video
http://s891.photobucket.com/albums/ac119/arakissun/?action=view&current=Picture016.mp4
 
In manual there is not pictures of the assemble of the motor part for the up/down move.Can someone give me some help for the parts.I think I don't have 2 or 3 pieces
 
Back
Top Bottom