Jungle King Instruction Card Question

Superully

Active member
Joined
Apr 22, 2008
Messages
1,749
Reaction score
11
Location
Lauda, Baden-Wuerttemberg, Germany
A friend of mine is currently working on vectorizing the Jungle King bezel for later reproductions. In order to finish it he needs some precise measures.
Can anyone give me the width (A) and the height (B) of the instruction card cutout (see attached pictured) and if possible also the dimensions of the instruction card itself?

Speaking of which, this goes to Rich ;): how are those instruction card reproductions coming along? As far as I know, they were almost ready to be printed on that red plastic material, right? An update would be cool ...

Thx a lot for your help, hope someone can get those measures! :)
 

Attachments

  • Jungle King Bezel Instruction Card.jpg
    Jungle King Bezel Instruction Card.jpg
    44.2 KB · Views: 13
cut out 15 7/8in X 2in. The actual cut out has rounded corners not 90 degree. IF I have time later and no one answers how big the actual underlay is I will get that measurement too.
 
cut out 15 7/8in X 2in. The actual cut out has rounded corners not 90 degree. IF I have time later and no one answers how big the actual underlay is I will get that measurement too.

thx a lot, totally appreciate your help. would be cool if you found the time for the other measures as well! thx again!!!
 
Back
Top Bottom