Jungle Hunt sound/control issues

mochaman

Active member
Joined
Feb 10, 2012
Messages
898
Reaction score
35
I picked up a JH cocktail and it has two issues that has me stumped. New to diagnosing here. It has no sound at all. Even tried new speaker. Pots seem good. The other problem is player 2 controls do not work. I'm stumped. All connections are good, checked them numerous times. For whatever reason, it has a switcher in it to power board but transformer still in it and hooked up I think. "H" connector not hooked up, tried to hook up and nothing. Any help is much appreciated.
 
Post some pic of the power connections. I suspect a wrong connection and possible player two is connected backwards. Pics will help.
 
Sorry for delay in response. Got sound partially working. Was connector. Player 2 has problem with cp. Have to reset roms at some point.
 
Last edited:
Very confused

Just for fun I decided to put P1 wire harness on P2 control panel, and P2 wire on P1 controls. Both sides play fine but upside down. Switch them to there normal locations, P2 dead. When the wires are in normal locations, P1 controls work fine. I just don't get what could be the problem. Hope I explained this correctly.
 
Just for fun I decided to put P1 wire harness on P2 control panel, and P2 wire on P1 controls. Both sides play fine but upside down. Switch them to there normal locations, P2 dead. When the wires are in normal locations, P1 controls work fine. I just don't get what could be the problem. Hope I explained this correctly.

I was going to suggest checking the dip switch settings until you posted that.
 
Back
Top Bottom