Joust video problem

baritonomarc

Member
Joined
Mar 19, 2010
Messages
548
Reaction score
7
Location
Mestrino, PD, Italy
+1. Reseat the video cable after you pull it and check the ground line in it. I had one that looked like that. It turned out to be a break in the ground line. I am guessing I probably smashed it with the back door, oops! :eek:

ken
 
Well, the cable was good and the ground was perfect

BUT

my starting statements where wrong: the problem lies on the monitor! My joust has a jamma harness and i plug it to the original PCB with an adapter i made; putting in a working PCB the video prob is still there!

Sorry for my statemets, i had toyied a lot with my logic probe on IC's, so i was almost sure i had shorted something.

I will open a new topic on the right forum section ;)
 
Back
Top Bottom