Joust 2 (or other Williams cabs) - where do those switches go?

Superully

Active member
Joined
Apr 22, 2008
Messages
1,749
Reaction score
11
Location
Lauda, Baden-Wuerttemberg, Germany
Joust 2 (or other Williams cabs) - where do those switches go?

my J2 restoration is coming to a close (i have to fix the speech problem though), but i still need to figure out whether to attach the interlock switch and the adjustment switches which are - for now - simply lying on top of the coin box. have a look at the following pictures:

5821429709_8d539064ed_b_d.jpg


5821429267_fdca073f6c_b_d.jpg


i don't want to leave them like that, so any clue on where to attach them is appreciated. of course, if you could take a picture for reference it would be a killer! :)

thx a lot guys!
 
The 3 switch plate is normally mounted on the coin door on the hinge side, but since you have the narrow coin door, you will need to mount it to the cabinet just inside the coin door. Mount it so that you can reach it with the coin door open.

The other switch is the memory protect switch. It should be mounted so that the switch is depressed when the coin door is closed. From the picture, it looks like mounting it on the left side of the coin door near the bottom is the only place that would work. On the normal wide Williams coin doors, it is mounted on the hinge side, but from the picture, it doesn't look like there is sufficient space to mount it there.

ken
 
The other switch is the memory protect switch. It should be mounted so that the switch is depressed when the coin door is closed. From the picture, it looks like mounting it on the left side of the coin door near the bottom is the only place that would work.

thx ken, i thought that was an interlock switch which controls the power to the cabinet. "memory protect switch"? sounds like it protects the memor ;) what does it do exactly? is it supposed to get released once you open the coin door?
 
Back
Top Bottom