Jatre Specter- What part is this?

pingopongo

New member
Joined
Feb 18, 2007
Messages
23
Reaction score
0
Location
Melbourne, victoria, Australia
Hi guys, I have a Jatre Specter game that I recently brought not working. I have found that it is missing a small circuit board inside that was screwed on the back wooden wall. I was wondering if anyone could give me some info on the missing part or if they had one for sale. It has two plugs that would plug into the board. In the first pic I marked the position of it with a cross. I have also included a pic of the plugs, I hope some one can help. Regards
 

Attachments

  • missing1.jpg
    missing1.jpg
    97.1 KB · Views: 40
  • IMG_0139.jpg
    IMG_0139.jpg
    100 KB · Views: 35
  • IMG_0140.jpg
    IMG_0140.jpg
    75.2 KB · Views: 30
might help if you could identify where the two plugs in the photo go to and test what voltages they are with a dmm.i doubt they would have had many of these tables in the USA and that would explain the lack of response as nobody would likely know but somebody might hazzard a guess with some more information.
 
Take a picture a bit further away so we can compare to other sources, the space invaders manual mentions something about a sound board, not sure on these clones. also is this a cocktail or standup?
 
Take a picture a bit further away so we can compare to other sources, the space invaders manual mentions something about a sound board, not sure on these clones. also is this a cocktail or standup?

Game is a Cocktail. I have seen one on utube and asked the guy if he could tell me a bit more of the part inside his but unfortunatly a repairer has it at the moment so I can't get any info untill he gets it back. By the looks of the wiring it runs to a large transformer , this transformer can been seen in the second pic mounted to the floor of the cocktail between the wooden coin box and the monitors chassis. On the left hand side of the transformer most of it's wires run up to the plugs, so I guess either it's going to be a DC power supply or similar board. Regards
 
Last edited:
Back
Top Bottom