Jamma to Taito adapter? (Plus - Zookeeper fix help).

pmWolf

New member
Joined
May 26, 2010
Messages
148
Reaction score
2
Location
Union City, Michigan
Jamma to Taito adapter? (Plus - Zookeeper fix help).

I have a dedicated Zoo Keeper that I'm getting kind of fed up with. I just can't seem to get it working again, and it has been sitting for over a year now.

(It had a CMOS error....so I replaced those chips. Still had an error...so I replaced every single bit of socketed RAM. Still didn't work. I bought a second (untested) board and swapped parts until I was blue in the face).

I've tried to get someone to fix the board since it is obviously beyond my limited skills at this point...but nobody wants to touch it.

So...I'm kind of stuck, and not sure what to do at this point.

Then....I saw that Taito Multi-Game. That'd be a pretty sweet replacement....I'd get my ZooKeeper back, PLUS some other games.

However...it is a Jamma board. Any way to retrofit it so that it can plug into my ZooKeeper cab?

(I see plenty of Taito to Jamma adapters...but none that go the other direction).

Thanks for your time!
Pete Mathis
[email protected]
 
Back
Top Bottom