Jamma to playchoice adapter?

_jmfr

Well-known member
Joined
Jan 15, 2009
Messages
1,024
Reaction score
64
Location
St Louis, Missouri
Does one of these exist? can they be easily made? I may be coming across a vs cab here soon, and i wanted to make into a smb/dr mario with a jamma adapter, and switcher. Im wiring it with a jamma harness because the original harness is not in the cab. I thought it would be cool to ad the playchoice mobo and have one badass nintendo cab. so anyway, is there an easy way to connect a playchoice mobo to a jamma connector?
 
Hmmm....could you use a jamma harness with a VS adapter, and then make a Playchoice adapter to plug into the VS adapter? That sounds a little ghetto, but don't VS and PlayChoice use the same # of pins, but the pinouts are different? If that is true, theoretically your Playchoice to VS adapter would just be wires jumping to correct the controls or whatever, right? Maybe somebody could jump in and verify if this is the case. I don't have any of these pcbs or a way to test this out, just throwing some ideas out there.

http://www.mikesarcade.com/cgi-bin/store.pl?sku=VS2JAMMA
 
My Vs to JAMMA adapters are much nicer that that POS :)

If you get a PC board w/ Vs pinouts instead of punchout pinouts, you can just swap boards and it'll make things a lot easier....
 
Back
Top Bottom