Jamma Cab with working Capcom Bowling

machfelon

Well-known member
Joined
Jul 21, 2006
Messages
1,829
Reaction score
36
Location
Holmdel, New Jersey
Rating - 100%
18   0   0
Have a trackball jamma cabinet. Was a Vanguard originally I think. Has Capcom Bowling PCB installed (working) plus the marquee. Monitor needs some tweaking, colors a little washed out and I never wired up the controls.

First 100 or trade takes it......
 

Attachments

  • ebaydec2010 065.jpg
    ebaydec2010 065.jpg
    99.4 KB · Views: 43
  • ebaydec2010 062.jpg
    ebaydec2010 062.jpg
    115.1 KB · Views: 22
Being a newbie, this might be a stupid question. I'm looking to make a 60-in1. Since your Capcom bowling is Jamma and Vertical, is it a good candidate for this?
 
Being a newbie, this might be a stupid question. I'm looking to make a 60-in1. Since your Capcom bowling is Jamma and Vertical, is it a good candidate for this?

Yeah you could make a 60 in 1 with this.

Would have to buy a 8 way joystick and install in player 1 and then leave the trackball installed for player 2. That way you would be good for game likes centipede etc. Monitor seems to be missing reds which is why its washed out. Can probably be fixed but not by me I dont mess with monitors :)

lemme know
 
Yeah you could make a 60 in 1 with this.

Would have to buy a 8 way joystick and install in player 1 and then leave the trackball installed for player 2. That way you would be good for game likes centipede etc. Monitor seems to be missing reds which is why its washed out. Can probably be fixed but not by me I dont mess with monitors :)

lemme know

That is what I have done with my Capcom Bowling, though for the games on the 60-1 I prefer to play, I use a 4 way stick (Ms.Pac stick). I did have to rewire the trackball as well, and ended up using a Happ 2 1/4" setup. Best of luck to ya.
 
Back
Top Bottom