It's never easy

KidVidiot

Thread Manager
Joined
Aug 9, 2011
Messages
7,646
Reaction score
525
Location
Los Angeles, California
I think that's my motto for anything arcade related.

So I got a working k7500 chassis to replace my busted sharp image 325 ega one. They looked pretty similar from pics and I assumed it would be a simple swap...or not. Basically everything seems to line up, except the five colored wires (rgb etc) coming from the (RCA) monitor have no place to plug into the chassis. Is this a simple case of swapping molex connectors? This is my first swap attempt
 
Are you trying to swap just the chassis, or the entire monitor? Because I seriously doubt you're going to be able to just move over the chassis - the yoke usually specific to the chassis. Unless that they just happen to be the same, you're going to have to change the yoke too. Did someone tell you the K7500 would work in that?

-Ian
 
Yeah...I just took a (non)educated risk that they would happen to be the same, since another blitz I had at one time had a k7500 chassis
 
Last edited:
Back
Top Bottom