Issue capping a WG U2000 no old cap at C519

makamusement

New member
Joined
Jul 6, 2009
Messages
156
Reaction score
1
Location
New York
Capping a Wells U2000. There is no old cap in C519 which is on the fly back. Holes have solder but there are no broken off leads. Should I put a cap in there or leave it alone??
Thanks in advance.
 
leave it if the solder looks factory all these old monitors have all kinds of factory mods and the kits try to accommodate for them
 
C519 as i recall, i am pretty sure its on the Neck PCB. if your chassis never had a cap in a location usually you don't install one because alot of cap kits cover many variations of a particular model and some variations didn't use all caps in a kit. i don't recall ever seeing a u2000 without the C519 but i don't put my hands on many of them.
 
pics pics pics.

the U2000 went threw so many revisions, it is no wounder most folks hate them.

they are almost as bad as the K7000.

pics pics pics.

Peace
Buffett
 
Back
Top Bottom