ISO Ms Pacman Cocktail Artwork

Dk1983

Member
Joined
Apr 4, 2016
Messages
85
Reaction score
15
Location
North Carolina
I have a original Pacman cocktail that was converted to a Ms Pac.

I am in need of the overlay and CPO. Any suggestions on where to source these?

08ddc509ecc5d6b165a630bfbb41006b.jpg
46f7357682fe5f8fea4197ac77f56f1f.jpg
 
Sure looks like it's all original Pacman artwork but Arcadeshop should have artwork for it...?
 
If you can't drop $255 on a proper silkscreened repro you can get new clear glass from Holland Computers

http://www.hollandcomputers.com/sto...-aftermarket-arcade-cocktail-tables-p8154.htm

And an underlay at two bits score (pac-man.com)

http://www.pac-man.com/pacman/cocktail/out/

Total is around $125

Just make sure you get the right glass with the right radius.

Yeah I think thats better because 225 is way to much for glass imo. It looks nice but that costs as much as the machine itself lol :D
 
I don't want this to come off as negative, but here goes. What you pay for the project/game has no bearing on what reproduction artwork should or does cost. Consider that the proper and more expensive art is actually silk screened and color matched and made to match the original piece as closely as possible. There will always be cheaper ways to go, but the real deal costs what it does for a reason.
 
Last edited:
You'll need to take the ribbon cable and daughter board off, take the Z80 Chip off the daughter board and put it in the main board where the ribbon cable was, and you will need a new 5E, 5F character roms
 
Back
Top Bottom