iso k7000

It would be helpful to list if it's for a 25" or 19". If it's for a 19" you will want to specify "skinny neck" CR-31 or fat neck" CR-23.
 
It would be helpful to list if it's for a 25" or 19". If it's for a 19" you will want to specify "skinny neck" CR-31 or fat neck" CR-23.
They also did a 9" and a 13", but I'm pretty sure those are skinny :)
I have only ever saw a 9" once....strange looking little thing
 
They also did a 9" and a 13", but I'm pretty sure those are skinny :)
I have only ever saw a 9" once....strange looking little thing
Good call, I have a 13" skinny neck on my test bench.
 
The k7000 will accept a wide range of yokes, so you may have one laying around that will work.

To extend on @mopar5150 's point... just about ANY commercial TV after say 2008 will have a std res K7000 compatible yoke. If the neck is incorrect you can swap in the correct neck board for that tube (they are interchangeable)
 
@gutz has one for sale, not sure what neck size it is.

 
Back
Top Bottom