is this a WG U5000 CHASSI

jbaker

New member
Joined
Jan 29, 2012
Messages
358
Reaction score
0
Location
Arizona
is this a u 5000 chassi i thought u5000 chassi were duel resolution my chassi only has pins for 15k the other socket on the board to change jumper is empty just holes in the board does this mean this is an older model? the 25 inch tube says WG 088X0407-001
the chassi says 85X0397-0014 P738-F. ?
can you tell what monitor this is from the pic ?
i want to get a cap kit and hot but want to be sure of the model. thanks
 

Attachments

  • cimg0826s.jpg
    cimg0826s.jpg
    85 KB · Views: 171
  • cimg0827w.jpg
    cimg0827w.jpg
    77.8 KB · Views: 95
  • cimg0829c.jpg
    cimg0829c.jpg
    86.6 KB · Views: 96
  • cimg0691x.jpg
    cimg0691x.jpg
    66.1 KB · Views: 90
Last edited:
Yes. You can tell by the large connector in the center of the chassis. That's used to switch the game from standard to medium resolution.
 
Yes. You can tell by the large connector in the center of the chassis. That's used to switch the game from standard to medium resolution.

but there is no pins to switch the connector just a blank spot on the board where another set of pins should have gone. did they make these without duel resolution also
 
Are the pins only on the 15K side? Might be a standard-res only version of the U5000, which seems to be the case due to a lack of some parts on the neckboard...
 
Are the pins only on the 15K side? Might be a standard-res only version of the U5000, which seems to be the case due to a lack of some parts on the neckboard...

yea there only on the 15k side i was going to send it to you for rebuild but you look kind of buisy these days with your hands full do you thinks these boards are worth repairing or better to get a universal chassi. its just dead im hearing impared so i cant hear if its clicking or not :(
 
It's a U2000 if the med res connector isn't populated.
 
It's a U2000 if the med res connector isn't populated.

More like a K7400 based on the parts layout.

As for being dead - after you install a full cap kit, check R765, R760, & Q708...
 
As for not being able to hear ticking, just measure the HOT to see if you have any shorts between the center leg and either of the outer legs...
 
now i dont know which cap kit to buy?

now im confused i thank you guys very much for trying to help me but now i dont know what cap kit to buy i had 3 diffrent responces as to what chassi this is it came out of a deer hunting cab with a 25 inch monitor it looks like the original cab it has deer hunting labels inside the cab im posting a imageshack link with higher resolution pics so one of you guys might get a better idea of what chassi i have i cant seem to post big pics on this site to give you a better look thanks guys for all your help.

these are front and back pics.
http://imageshack.us/g/401/cimg0831qn.jpg/
 
Last edited:
Back
Top Bottom