Is this a 19K7635 Chassis?

friedfish

Active member
Joined
Apr 10, 2008
Messages
237
Reaction score
27
Location
Newark, California
A few weeks back I bought a couple of Toobin cabinets from Jehuie. I managed to make one complete and working except for one thing, a monitor chassis. The tube and frame in the cabinet are marked as a 19K7635.

Does someone know if this is a picture of a 19K7635? I found a manual online and the numbers look to match up.


http://www.flickr.com/photos/58313390@N00/6932966045/
 
Last edited:
Embedding a pic for you. Anyone know?

6932966045_a10f8088c6_b.jpg
 
Looks like a k7000 25" chassis to me.. But that's a guess cause letting us know the part number on the pcb would greatly help.
 
Looks like a k7000 25" chassis to me.. But that's a guess cause letting us know the part number on the pcb would greatly help.

Yeah, that's what I thought it was as well. I will have to dig it back out to find a part number on it but I'm pretty sure you are right.
 
So how can you easily tell the difference between a 25" standard resolution chassis and a 19" medium resolution chassis? I have attached a copy of the schematic from the 19K7635 manual.
 

Attachments

  • 20120228105625.pdf
    46.6 KB · Views: 8
the heat sink that IC3 is attached to short heatsink is a 19" and a tall is a 25
". and the width coil are dead giveaways for the two model types black is a 19" wite is a 25". plus they have P447 for the 19" and P538 for the 25" inked on the chassis in the middle.

and a med res 19" has a satellite board above on the left side of the fly on the heat sink with a red and wite wire coming off it.

Peace
Buffett
 
Back
Top Bottom