Is my JROK board hooked up correctly?

TheYeti

Well-known member
Joined
Sep 3, 2015
Messages
5,699
Reaction score
5,327
Location
Centennial, Colorado
I'm converting my original Qbert over to the JROK multi Qbert board. I have already converted over to a switching power supply with interface adapter.

So before I turn on this puppy and blow something up, can some fellow JROK Qbert owners out there verify that I have this board hooked up correctly? Specifically the red and black H.V. sync wires?

 
Last edited:
I'm converting my original Qbert over to the JROK multi Qbert board. I have already converted over to a switching power supply with interface adapter.

So before I turn on this puppy and blow something up, can some fellow JROK Qbert owners out there verify that I have this board hooked up correctly? Specifically the red and black H.V. sync wires?

1liVPkSK0t236L13TgsvZsCeYhC6OFIufLWVqBaqfeMpX92IB

https://youtu.be/37dDqY0-Gi0

https://youtu.be/iJjGAqQqH3k
 
Last edited:
Thanks for posting those videos but neither of them really apply to my situation. I'm using an original Qbert harness so I need to use the Jamma PCB Adapter board. I think that I just mostly want to make sure I have the red and black sync wires in the correct spot.

yeah i didnt see that til now..
 
Thanks for posting those videos but neither of them really apply to my situation. I'm using an original Qbert harness so I need to use the Jamma PCB Adapter board. I think that I just mostly want to make sure I have the red and black sync wires in the correct spot.

That's the correct spot. If you have them the wrong way around it won't hurt them or the monitor ( you just won't get a stable picture ) then just swap them round.

- James
 
That's the correct spot. If you have them the wrong way around it won't hurt them or the monitor ( you just won't get a stable picture ) then just swap them round.

- James

Perfect! Thanks James! Can't wait to get my Qbert working agian. :)
 
Back
Top Bottom