Is a 13" and 19" go7 chassis the same?

PCB board itself, is the same for each, but they have some different components from each other. There's not much you can borrow from one, to use on the other.
 
So you are dumb too? Lol

definitely not dumb.... there are some parts that interchange but very limited like width coil, but i have read the flybacks work but they have issue on the 13inch but i haven't had time to see if all do that. i will be testing that this fall because i have a FBO out to do that with.
 
The flybacks have different part numbers, but seem to be interchangeable.
Adjustment pot values are different.
13" has no B+ adjust circuit.

Probably other differences, these are the few I'm aware of.
 
aside from the neck board and the B+ circuit as others have said,

there are about 40 - 50 part differences between the 13" and 19"

it is not worth converting one unless you are extremely desperate and have nothing but time on your hands.

Peace
Buffett
 
Back
Top Bottom