Intermittent problem: Williams Flash

dieseldogpi

Member
Joined
Nov 19, 2009
Messages
432
Reaction score
0
Location
Selden, New York
Hey everyone, I am having intermittent problems with some switches and I cant figure out whats going on. The spinner switch, and the ball switch (switch that is closed when the ball is sitting under the apron, so the game doesn't know it drained). I replaced the diode, then it worked, then it didn't. I also re-soldered the wires and still an intermittent issue. Any suggestions? Am I missing something. Thanks for any suggestions.
 
No, I didn't even think of that...which shows my inexperience. I did physically open and close the switch by the spinner and the ball sensor, and sometimes they would work and sometimes they wouldn't. I'm guessing there could be other switches not immediately apparent that could affect these particular switches? I will run the diagnostics and report back.
 
Back
Top Bottom