interesting midway parts at Pinball Resource

Bet you that neon line voltage cable goes to either Cirqus Voltaire or SWEP1...


WLL-H12685 - Bet you that could be used as part of a cannon harness for STTNG...I know there's at LEAST one connector per gun that's shaped that way...

1 NOS Williams DIXI Mars Interconnect Cable H-17019 #WLL-H17019 $5.00ea <---what on earth? I have a STTNG and no clue what that's for lol...
 
Some of that stuff is impossible to find if you needed one, particularly the pcb's for the black and white games. Nothing I can use, though.... although it appears to me those joysticks are from Joust, right?
 
Frax; 1 NOS Williams DIXI Mars Interconnect Cable H-17019 #WLL-H17019 $5.00ea <---what on earth? I have a STTNG and no clue what that's for lol...[/QUOTE said:
That's a harness adapter for a dollar bill acceptor.
 
D@mn! They're already sold out of the Joust joysticks and someone grabbed all of the Midway door badges as well... Hopefully the lucky buyer will sell them here for a modest markup and pass on some of the savings.

Believe it or not they also had chrome coin entry plates for $3ea. Whoever grabbed these please send me a pm :)

mwy-90-117-3.jpg
 
Last edited:
not Midway but...

Every old Stern pin I've had to replace funky worn out broken slingshot pieces with whatever was lying around.

I'm thinking these here Capcom pieces should do the trick:

cap-a00329.jpg


Hard to go wrong at $3 a set.
 
Pinball Resource is a great place to get parts.
BUT it sure is NOT easy finding parts sometimes.
They don't even have a search do they?

You should see inside. It's just shelves with parts everywhere and Steve knows where everything is. Pretty crazy lol
 
Believe it or not they also had chrome coin entry plates for $3ea. Whoever grabbed these please send me a pm :)

mwy-90-117-3.jpg

If you get some 0000 steel wool and Turtle Wax Chrome Polish, you can resurrect even mostly rusted coin entry plates. Shake the polish real good and apply some to the steel wool, then polish away and buff with a terrycloth towel. You'll be happy with the results, I've used this trick over the years on countless coin entry plates, it's worth the extra effort and really makes a restored coin door look awesome.
 
Pinball Resource is a great place to get parts.
BUT it sure is NOT easy finding parts sometimes.
They don't even have a search do they?

Basically they carry everything, but you can't buy any of it if you don't have a part number.

If you can find a part number, though, I've rarely found anything they don't have.
 
I don't think they accept walk-ins, i e-mailed them about a couple things on that specials page as well as asking if i could stop by and pick em up.

seems they also only do things Bobs way (better for some of us as many only like paypal and credit cards :D )
 
I've been there twice. When I called I told him I lived in town and he said it wasn't a problem. When I showed up he put my order together in a matter or two minutes and out the door I went. Always a nice guy to! It's definitely not set up for walk ins so I see where he's coming from
 
Basically they carry everything, but you can't buy any of it if you don't have a part number.

If you can find a part number, though, I've rarely found anything they don't have.

I've only done business through emails, sending an email of what I want, with no part numbers, but good descriptions. I could see it being tougher on the phone though.
 
I've been there twice. When I called I told him I lived in town and he said it wasn't a problem. When I showed up he put my order together in a matter or two minutes and out the door I went. Always a nice guy to! It's definitely not set up for walk ins so I see where he's coming from

I've always been curious.......does anyone else work there besides Steve and Gloria? It seems to me they do EVERYTHING!

Edward
 
Back
Top Bottom