kencinder
New member
FS: Dedicated 4Player TMNT
I NEVER thought I'd be doing this, I own it for the simple reason it's one of my favorite games ever...but I have at least a couple reasons for doing so, not least of all...
I want more room for pins and I need a smaller UR vid in place of this to do it...or none in it's place for 2-3 more pins. My gameroom is small, and this game has a good bit more footprint than say a Dynamo HS-5.
I purchased it about 3 years ago, and immediately recapped the monitor so it's nice and crisp and looks great.
I picked up 4 NOS balltop sticks for the joys and some new leaf buttons, and installed those after thoroughly cleaning them and the rest of the machine.
Also found a used but in very nice condition control panel overlay...the one currently on this has a good section missing around Leo. New overlay just needs flattened nice and put on with some fresh adhesive and is included with the machine.
To fully restore it, like I had at one point intended? Needs new sideart, left side is missing some at the bottom, right is all there and just a bit banged up. I'd put new t-molding on and some bondo at the bottom right corner of the cab. Otherwise it's solid and clean.
I haven't taken any pics yet, it's rather tight in my currently overcrowded with parts and awaiting reno gameroom and I'd have to pull it out to do so.
I'll take pics, but only if you're SERIOUSLY interested...please don't make me haul this out for pics if it's not going anywhere.
I'm looking for $450 FIRM or trade for an EM/SS pin(+/- cash depending on title and condition), or a nice 2P UR cab with working 25" monitor(+cash).
I'm about an hour drive north of Toronto, ON for anyone who may be south of the border or a good ways from me this side of the border.
I NEVER thought I'd be doing this, I own it for the simple reason it's one of my favorite games ever...but I have at least a couple reasons for doing so, not least of all...
I want more room for pins and I need a smaller UR vid in place of this to do it...or none in it's place for 2-3 more pins. My gameroom is small, and this game has a good bit more footprint than say a Dynamo HS-5.
I purchased it about 3 years ago, and immediately recapped the monitor so it's nice and crisp and looks great.
I picked up 4 NOS balltop sticks for the joys and some new leaf buttons, and installed those after thoroughly cleaning them and the rest of the machine.
Also found a used but in very nice condition control panel overlay...the one currently on this has a good section missing around Leo. New overlay just needs flattened nice and put on with some fresh adhesive and is included with the machine.
To fully restore it, like I had at one point intended? Needs new sideart, left side is missing some at the bottom, right is all there and just a bit banged up. I'd put new t-molding on and some bondo at the bottom right corner of the cab. Otherwise it's solid and clean.
I haven't taken any pics yet, it's rather tight in my currently overcrowded with parts and awaiting reno gameroom and I'd have to pull it out to do so.
I'll take pics, but only if you're SERIOUSLY interested...please don't make me haul this out for pics if it's not going anywhere.
I'm looking for $450 FIRM or trade for an EM/SS pin(+/- cash depending on title and condition), or a nice 2P UR cab with working 25" monitor(+cash).
I'm about an hour drive north of Toronto, ON for anyone who may be south of the border or a good ways from me this side of the border.
Last edited:




