interest - Amplifone deflection board harness repro

joeycuda

Well-known member
Joined
Aug 17, 2009
Messages
14,522
Reaction score
990
Location
Madison, Alabama
interest - Amplifone deflection board harness repro

Stop me if someone else is working on this, but....

I need a few of the harness that attaches to the Amplifone deflection PCB. It would be correct color wire. Price not sure on, will have to see what the cost of wire and connector is. I figure I will make it match the original harness, but with a few wires slightly longer so that it can be used with the new repro PCB. On his repro, he uses connectors and the positions are slightly shifted, yet you could still solder to the PCB, as originally done.

You solder to the old board or terminate with connectors for the repro. I'm just doing the leg work in getting the colored wire together, bundled, and crimped pins and the one large connector.

How many would be interested in purchasing this?

Interest so far:

djw90 - 3
bheineck - 2
wolfeel - 1
EclipseEye - 1
Tornadoboy - 1
speleo_de - 2
kray37 - 2
alejandromad - 1
James_in_MD - 3
Black_Matrix - 3
cloggans - 3
HI25 - 1
disjaukifa - 2
WETHEREDS - 1
 
Last edited:
I doubt it would be much more than cost of materials, labor of love, blah blah.. Thanks. I plan to order wire this weekend. I have an intact board to copy and I'll extend the couple of wires as needed if you use connectors on the repro board, so will fit either way.
 
I will post a pic of the one I modified Joey

The only difference (between the original and the repro harness) is the 2 x purple/violet wires needed to be extended

Thanks for stepping up and doing this
 
Awesome. I should have an estimate on price next week, but building this interest list is great as I'll know how many to make. If I'm getting the correct wire to do a few, I might as well do a lot more. Thanks again.
 
Harness Pin Numbers

Here is the config of the Deflection Harness including Twisted Pairs on J902



And to get the molex headers lined up right, see guide below

 
Last edited:
Back
Top Bottom