Indiana Jones & Temple of Doom Joystick

mgreen

Well-known member

Donor 2012
Joined
Feb 6, 2012
Messages
1,473
Reaction score
45
Location
Idaho
I have an Indiana Jones & Temple of Doom cabinet but the joystick has a rubber grommet that has dry rotted into 4 pieces. This grommet is what actuates the micro switches for the controller. Has anybody found a supplier or a usable equivilant part?

Seemd like a properly researched o-ring could do the trick.
 
i did not know where to start looking but thanks to Jedi from the link above I was able to uncover the name of the Logo joystick and find rebuild kits much cheaper than the full service work.


Twisty wrist posts 20$ also
http://www.twistywristarcade.com/kits/22-atari-logo-stick-rebuild-kit-.html

Thanks for the help Jedidentist

Removed some info thanks much to the helping hands of the long term residents of this blog.
 
Last edited:
Daviea from KLOV posts this price:
$12 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball and Centering Plunger (BASIC)
$20 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball, Centering Plunger and Actuator (DELUXE)

ummmmm i wouldnt buy sh*t from this guy!!!! Hes a VERY BIG problem on here!!! owes ALOT of people money on here!!
 
I have an Indiana Jones & Temple of Doom cabinet but the joystick has a rubber grommet that has dry rotted into 4 pieces. This grommet is what actuates the micro switches for the controller. Has anybody found a supplier or a usable equivilant part?

Seemd like a properly researched o-ring could do the trick.

I had the same issue w/ mine some time ago. Mine became loose overtime thus not making contact on the angles. I went to the local hardware store and found something similar - still works perfect.
 
Back
Top Bottom