Riptor
Well-known member
I have about 7 or 8 switcher power suppys that will work for a qbert. They have all the required voltages except the 20v for the coin counter. Right now I have 5 or 6 tested working and might have a couple more. I have three dead ones im going to fix so roughly 8-10 will be available. I plan on recapping these and making a harness so it will be plug and play to the original harness. The only thing that will be needed is to tie in the 120v but I might be able to make that plug and play as well.
I have priced new ones out in the past and they are really expensive and not cost effective. These came out of Bally slot machines that I parted out a while back. These will run the sound amp at a much safer 24v rather than the 30v.
Any interest at $55 shipped(50 states)? Not sure when I will have these ready, probably a few weeks. I have to order in a bunch of caps to recap them all and some connectors for the harness.
I have priced new ones out in the past and they are really expensive and not cost effective. These came out of Bally slot machines that I parted out a while back. These will run the sound amp at a much safer 24v rather than the 30v.
Any interest at $55 shipped(50 states)? Not sure when I will have these ready, probably a few weeks. I have to order in a bunch of caps to recap them all and some connectors for the harness.