Ikari warriors dynamo control panel holes layout needed

kcorcoran

Well-known member
Joined
Aug 6, 2014
Messages
1,272
Reaction score
1,117
Location
Maricopa, Arizona
Does anyone have a cut corner dynamo ikari warriors control panel 23.5" wide.

Im looking for a diagram or tracing or the button and joystick hole locations.

I have a blank panel for my ikari project and need to drill holes.

Thanks.
 
Ikari Warriors, Victory Road and a handful of other cabs of that era use the generic "universal" hole locations. FYI the panel you have up in your fs thread is from a clone.
 
Understood but ive also see many ikari panels via google seach and on here that are specifically drilled for ikari warriors with no other holes.

The panel i currently have in my original ameridarts dynamo clone is a swiss cheese panel (probably clone too) as shown but without drilling the bottom buttons ikari cpo wouldnt line up.

17252847840891681860777509640766.jpg

So im looking for the button layone that alings with the art like one in this photo amd others ive seen..



So i assume someone drilled all those different panels for ikari from blanks back in the day. Either way, im looking for a trace or measurement of that layout before i just eyeball it based on the CPO
 

Attachments

  • Screenshot_20240902_064926_Chrome.jpg
    Screenshot_20240902_064926_Chrome.jpg
    392.7 KB · Views: 10
Do you have a CPO to apply to your blank control panel? If so, use that as a guide, other peoples' measurements don't count. The holes need to match your CPO…

p
 
Understood but ive also see many ikari panels via google seach and on here that are specifically drilled for ikari warriors with no other holes.

The panel i currently have in my original ameridarts dynamo clone is a swiss cheese panel (probably clone too) as shown but without drilling the bottom buttons ikari cpo wouldnt line up.

View attachment 765849

So im looking for the button layone that alings with the art like one in this photo amd others ive seen..



So i assume someone drilled all those different panels for ikari from blanks back in the day. Either way, im looking for a trace or measurement of that layout before i just eyeball it based on the CPO

Hmm could have sworn they were all just universal panels. I haven't seen one of those.
 
i have a cpo. I had just seen a number of control panels that dont seem to look like someone just lined up a cpo and drilled so i assumed there was/is actual measurement for where the buttons and sticks belong.

Im a bit of a stickler for measurements and didnt want to just freestyle it if a standard exists.

Another example
 

Attachments

  • 1_636f5aac6fbcc986e0f18263c96fbc8f.jpg
    1_636f5aac6fbcc986e0f18263c96fbc8f.jpg
    227.1 KB · Views: 3
Ikari warriors,
Guerrilla War
Victory road
Plus others use the exact same hole pattern. I have several control panels I can take pictures of the measurements from.
Or you can just buy one off me too .
 
Back
Top Bottom