IGT Poker Machine - Verticle Lock/Hold Issue during Warm Up

Toph

New member
Joined
Apr 28, 2018
Messages
195
Reaction score
2
Location
Arizona
IGT Poker Machine - Verticle Lock/Hold Issue during Warm Up

Hey guys. Recently got this machine at auction for $80. It had no keys so I took a gamble (pun intended). Drilled out the locks and it had $130 in quarters inside. I was able to get it fully functional with some tweaking, but it seems the verticle hold goes crazy and just keeps cycling for about 20-30 mins if I boot it up cold. Once it warms up it's fine.

Any idea what may be causing this? This thing is tough to get into to really inspect the chassis without really gutting it, so hoping someone has some ideas.

Thanks!
 
igt poker

clean the vert hold pot with contact cleaner, if that does not help, replace it, or the whole adjust bar, also cap kit for the monitor and it should be good then
I sell the whole adjust bar of pots if you need one
 
clean the vert hold pot with contact cleaner, if that does not help, replace it, or the whole adjust bar, also cap kit for the monitor and it should be good then
I sell the whole adjust bar of pots if you need one

Ya? How much?

Thanks man
 
Back
Top Bottom