Identifying a monitor

newthing34

Well-known member

Donor 7 years: 2013, 2020-2025
Joined
Nov 27, 2013
Messages
1,868
Reaction score
453
Location
San Jose, New Mexico
Hello I would like to put a cap kit on this chassis.
Not sure which one it is
1. Electrohome G05-801
2. Electrohome G05-802
3. Wells Gardner 19V2000

Also does anyone know where to get a cap kit for a Asteroids.
There is a crackling sound coming out of the speakers.
I am thinking a cap kit for the Asteroids PCB should fix that.

thanks
 

Attachments

  • 20160624_082802.jpg
    20160624_082802.jpg
    203.1 KB · Views: 15
  • 20160624_082810.jpg
    20160624_082810.jpg
    203 KB · Views: 13
  • 20160624_082844.jpg
    20160624_082844.jpg
    216.8 KB · Views: 17
Last edited:
Hello I would like to put a cap kit on this chassis.
Not sure which one it is
1. Electrohome G05-801
2. Electrohome G05-802
3. Wells Gardner 19V2000

Also does anyone know where to get a cap kit for a Asteroids.
There is a crackling sound coming out of the speakers.
I am thinking a cap kit for the Asteroids PCB should fix that.

thanks

the 801 is very different because it has two huge 7200uf caps and the pcb is on the bottom of the frame. the 802 and v2000 have the 6800uf caps and pcb mounted on the right side (looking from the rear). your speaker issue could be coming from the AR board and that might be your issue.
i have in stock the cap kits for the monitors including the filter caps in stock and the ar board caps and parts.

pm me if you need any kits.

on a side note the 802 and v2000 have the same cap kit locations and only have a few caps in the 500 section that are either 1uf (v2000) or 2.2uf (802) as i recall from memory.
 
Last edited:
Back
Top Bottom