ID my SEGA Cab Please :D

Broodwich

Well-known member

Donor 6 years: 2012-2013, 2015, 2020, 2023-2024
Joined
Feb 20, 2011
Messages
9,846
Reaction score
420
Location
Albany, New York
So I've had this SEGA cab for 6+ years and i'm wondering what it originally was, it had 2 CPS2 4player harnesses in it and was set up for 3 players. it has a Zenith G-A63ADG25X monitor WG082283 chassis, WG732245 Pix Tube, and WG25k7191 serial sticker on the Zenith. I know the chassis has been changed out during my ownership, it's always been a jamma cab from what i can tell also. I've posted pics of the cab when i originally got it years ago, and a pic of the serial no. on the back :D

Thanks so much guys, any info about monitor would be great too but i think i got the basics 25" Zenith Tube with K7000 chassis.

When i got it it had no marquee and only a Alien Vs. Predator instruction card on the Data East cardboard monitor bezel.
 

Attachments

  • Project_coinbox1.JPG
    Project_coinbox1.JPG
    40 KB · Views: 23
  • 100_0789.jpg
    100_0789.jpg
    102.9 KB · Views: 9
It's a Spiderman the Arcade game. System 32 and it's a 4 player game.
The cab is basically identical to Golden Axe Revenge of Death Adder.

1112757163.jpg
 
Last edited:
It's a Spiderman the Arcade game. System 32 and it's a 4 player game.
The cab is basically identical to Golden Axe Revenge of Death Adder.

wow very cool, thanks for the info

http://www.arcade-museum.com/game_detail.php?game_id=9717 (link to Spider-man). looks dead on.

tho GARoDA looks close except the control panels, spider-man is all black so i'm leaning more towards that. Did it come in 3 player flavor? because my cp is was only set up for 3.

is there some fancy site that will decode my serial?

I remember Spider-Man, that game was fun as hell, hmmm might have to go looking for one in the future :D
 
Last edited:
just open it and look for empty holes. Unless they built a new one you should see all of the original holes.

They are the same cab, trust me....

They are 2 button per 4 players. I'm sure yours were drilled out for more. RODA came with 3 per player. If it looks like it was originally 3 buttons per player then it might be a RODA instead.

Here's a pic of mine.

IMG_0082.JPG
 
RoDA was a great game too, i have Golden Axe as u might have seen from my sig, great game also, i'll check the cp now it's in terrible shape since i replaced it with a 2p 6 hole cp i fab'd up.
 
4 players 2 buttons per player, Spider-Man it was! very very cool

btw is your cp cut at a 45 where it meets the monitor? and do you know of a good place to get a replacement plastic monitor bezel or will the standard 25" work?
 
Last edited:
Back
Top Bottom